Remotec ZXT-120 V1.6E Manual de usuario descargar pdf (Pagina 8)

How to switch ZXT-120 listening mode from "Always Listening" to

"FLiRS" (or vice verse)

Inclusion/Exclusion

The primary controller should indicate that the action was successful. If the controller

indicates the action was unsuccessful, please repeat the procedure.

Step

Press and hold the PROG button on

the ZXT-120 for around 5 seconds

Setup Key

LED Indication Status on ZXT-120

- LED turns ON after PROG key

hold for 5seconds

Release the button and then press the

PROG button 3 times within 2 seconds

- LED flashes twice then stay off

(ZXT-120 set in FLiRS mode)

- LED flashes four times then stay

off (ZXT-120 set in Always

Listening mode)

Step

Refer to your primary controller

instructions to process the inclusion/

exclusion setup procedure.

Setup Key

LED Indication Status on ZXT-120

When prompted by your primary

controller, click once on the PROG

button

- LED flashes once then stay off

(ZXT-120 will report the

supported command class)

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

Sin comentarios

Remotec ZXT-120 V1.6E Manual de usuario Pagina 8